Don't have an account?
Creating an account has many benefits: check out faster, keep more than one address, track orders and more.
PUReClean365+ 150 DN 11 15M 1/2F SS
Description
Technical Spec
Inlet | 1/2" Female |
---|---|
Outlet | 1/2" Female |
Material | Stainless Steel |
Bar | 150 |
Colour | Blue |
Length | 15m |
Max Temp °C | 60 |
DN Internal Diameter | 11mm |
Commodity Code | 3917390099 |
Country of Origin | Germany |
Need help?
Contact G&S 01768 865985
Overview
Pureclean365+ Food Industry Hose
Blue Pureclean365+ hose is designed for industrial foam applications, made from PVC with a smooth non-porous surface which is easy to clean and sanitise. The hose is 20% lighter than comparable hoses on the market and constructed with three layers one of these layers has rot proof textile mesh. This hose is very durable and can withstand the rigors of daily use, including bending, stretching, and handling, without experiencing deterioration or leakage. Manufactured to meet industry standards according to (EG) 1935/2004, (EU) 10/2011 and (EG) 2023/2006. Designed for industrial foam applications.
The features and specifications of this hose make it a good addition to any industrial foam system for open plant cleaning within the food industry. The diameter of this hose makes it ideal for anyone using an foam injector with compressed air. If you know the flow and pressure of the system you are installing products onto take a look at our interactive chemical injector chart to ensure you combine all the correct products to create thick foam. For more information on our range of equipment dedicated to the food industry take a look at our Food Industry page.
Help with sizes
Foam Injector size guide.
Use the below chart to help you select the correct injector size.
Pressure
Flow
You will need to know the flow rate and pressure of the pressure washer or system that the injector is to be installed.
Firstly select the closest flow rate (round up if required)
Then move right across the chart until you are at the closest pressure column.
The top number (1.6) is the injector size.
For foam injectors not using compressed air the number in brackets underneath is the correct ST75 foam lance size required.
Alternative | ||||
Injector Size | Injector Part No | ST75 Size | ST75 Foam Lance | ST72 Foam Lance |
1.3 | 200160500 | 05 | 200075576 | 200072633 |
1.4 | 200160505 | 07 | 200075572 | 200072633 |
1.5 | 200160510 | 07 | 200075572 | 200072633 |
1.6 | 200160515 | 075 | 200075572 | 200072633 |
1.7 | 200160520 | 10 | 200075573 | 200072625 |
1.8 | 200160525 | 13 | 200075578 | 200072625 |
1.9 | 200160530 | 13 | 200075578 | 200072625 |
2.0 | 200160535 | 15 | 200075579 | 200072629 |
2.1 | 200160540 | 15 | 200075579 | 200072629 |
2.2 | 200160545 | 15 | 200075579 | 200072629 |
2.3 | 200160550 | 20 | Please Contact | 200072629 |