A box
Free UK Mainland Delivery on online order over £500*
An award
Over 40 Years of industry experience
Warehouse
Extensive Warehouse stocking over 10,000 products

Please refresh the page in 1 minute to see the next delivery time.

Our next despatch cut-off point is ?? Days ?? Hours ?? Minutes ?? Seconds

PURECLEAN 40 HOSE 50B 15M 1/2"F/F SS

PURECLEAN 40 HOSE 50B 15M 1/2"F/F SS

SKU

Description

PUReClean365+® - Food hose is suitable for contact with liquid food products. Suitable for water and water mixes of usual cleaning detergents

Technical Spec

Inlet1/2" Female
Outlet1/2" Female
MaterialStainless Steel
Bar45
ColourBlue
Length15m
Max Temp °C70
DN Internal Diameter12mm
Weight4.15
Country of OriginGermany

Datasheets

Need help?

Contact G&S 01768 865985

Overview

Pureclean365+ Food Industry Hose

Blue Pureclean365+ hose is designed for industrial foam applications, made from PVC with a smooth non-porous surface which is easy to clean and sanitise. The hose is 20% lighter than comparable hoses on the market and constructed with three layers one of these layers has rot proof textile mesh. This hose is very durable and can withstand  the rigors of daily use, including bending, stretching, and handling, without experiencing deterioration or leakage. Manufactured to meet industry standards according to (EG) 1935/2004, (EU) 10/2011 and (EG) 2023/2006. Designed for industrial foam applications.

The features and specifications of this hose make it a good addition to any industrial foam system for open plant cleaning within the food industry. The diameter of this hose makes it ideal for anyone using an foam injector with compressed air. If you know the flow and pressure of the system you are installing products onto take a look at our interactive chemical injector chart to ensure you combine all the correct products to create thick foam. For more information on our range of equipment dedicated to the food industry take a look at our Food Industry page.

ST164 Foam Injector

ST3100 Food Safe Foam Gun

Short Foam Nozzle

Foam Unit Trolley

Help with sizes

Use the below chart to help you select the correct injector size.

Using the chart

You will need to know the flow rate and pressure of the pressure washer or system that the injector is to be installed.

Firstly select the closest flow rate (round up if required)

Then move right across the chart until you are at the closest pressure column.

The top number (1.6) is the injector size.

The number in brackets underneath is the recommended ST75 foam lance required.

Distributor request Don't have a G&S account but need a distributor? Click Here