
ST164 INJECTOR WITH COMPRESSED AIR MODULE AND METERING VALVES-2.3mm
SKU
200164611
Technical Spec
| Inlet | 3/8" Female |
|---|---|
| Outlet | 1/2" Female |
| Max LPM | 80 LPM |
| Material | Stainless Steel |
| Bar | 350 |
| Colour | Blue |
| Max Temp °C | 100 |
| Nozzle Size | 2.3mm |
| DN Internal Diameter | 9mm |
| Weight | 2.75 |
| Country of Origin | Germany |
Description
The ST164 easyfoam365+ foam Injector made from stainless steel, designed to be part of a cleaning system to produce foam. This injector has a compressed air connection, which can create more dry sticky foam. A DN12 hose must be used with a wash gun that has 1/2" inlet and outlet, this will prevent the foam from collapsing. This injector allows the user to have up to two different chemical options attached and gives them the ability to adjust each chemical by using metering valves. The different chemicals can be selected by positioning the lever.
Datasheets
Need help?
Contact G&S 01768 865985
Overview
ST164 Foam Injector with compressed air and metering valves
This venturi foam injector has a restrictive orifice that the water stream is forced through. Operating this injector with a device that contains a low pressure nozzle such as a Suttner ST75 foam lance causes a vacuum effect within the chemical injector. Chemical is then drawn up into the water stream. These injectors are used in many industries for industrial cleaning including Agriculture, Automotive and the Food processing industry. This is an essential piece of equipment for anyone looking to design and build an efficient cleaning system within a factory environment. The ST164 allows the user to select between two different chemicals by simply positioning the lever. Suitable for systems used to clean vehicles carrying cattle and food processing areas to avoid bacterial spread. We have a range of equipment that can be used in combination with our foam injectors to apply foam, the ST75 Foam Head, ST76 Foam Blaster or our extremely innovative Triple Nozzle which is specifically designed for applying foam and disinfectant chemicals within food processing environments.
Foam application with compressed air
For those requiring a dryer more sticky foam this injector is fitted with a compressed air connection. A DN12 hose must be used with a 1/2" inlet and outlet wash gun to stop the foam collapsing back into a liquid state when using compressed air.
Spray guns with large cross sections are required such as the ST2720, ST2725, ST3100 or the ST3300 , lance with an air injector is not required.


We highly recommend using a chemical filter on the end of your chemical tube. This helps to prevent any unwanted debris possibly entering your chemical injector and causing a blockage. Always check the viscosity of the chemical you are using as this can greatly affect the draw rate of the chemical into the water stream. Dosing of chemical can be adjusted by adding one of the ten nozzles inserts which are provided with each injector.
Foam application with compressed air
For those requiring a dryer more sticky foam this injector has an optional compressed air connection. A DN12 hose must be used with a 1/2" inlet and outlet wash gun to stop the foam collapsing back into a liquid state. Spray guns with large cross sections are required such as the ST2720, ST2725, ST3100 or the ST3300. A lance with an air injector is not required.
The ST164 chemical injector is available in nozzle sizes of 1.2 - 2.8mm.
Chemical suction is affected by water temperature
At higher temperatures the maximum achievable vacuum drops significantly. The graph demonstrates that at temperatures of 90°C and above, the venturi effect becomes impossible.


| Inlet Temperature | ST160 Vacuum in bar | Alto Vacuum in bar | Karcher Vacuum in bar |
|---|---|---|---|
| 90°C | 0,00 | 0,00 | 0,00 |
| 85°C | 0,10 | 0,15 | 0,10 |
| 80°C | 0,35 | 0,25 | 0,20 |
| 75°C | 0,48 | 0,35 | 0,35 |
| 70°C | 0,62 | 0,45 | 0,55 |
| 65°C | 0,69 | 0,55 | 0,67 |
| 60°C | 0,75 | 0,64 | 0,76 |
| 55°C | 0,79 | 0,70 | 0,82 |
| 50°C | 0,82 | 0,74 | 0,84 |
| 45°C | 0,85 | 0,77 | 0,87 |
| 40°C | 0,86 | 0,80 | 0,89 |
| 35°C | 0,87 | 0,82 | 0,91 |
| 30°C | 0,88 | 0,83 | 0,93 |
| 20°C | 0,90 | 0,85 | 0,94 |
| 10°C | 0,91 | 0,86 | 0,94 |


















