• ST-83 COLD-FOG AIR HAND TOOL

    Product Code: 200083500

    An ST-83 cold fogging device.
    An ST-83 cold fogging device. ST-83 COLD-FOG AIR HAND TOOL ST-83 COLD-FOG AIR HAND TOOL An ST-83 cold fogging device. ST-83 COLD-FOG AIR HAND TOOL ST-83 COLD-FOG AIR HAND TOOL video video
    Download Image

    Overview

    The ST-83 disinfection cold fogging device is perfect for disinfection, humidification, cooling, odor neutralization, pest control, mold treatment and dust deposition. The cold disinfection device can be placed in a room on its own. The cold mist spreads throughout the room and penetrates even the smallest cracks. The device comes with two nozzle inserts, one for better swirling suitable in smaller rooms such as passenger compartments. The other nozzle has a larger throw range for the treatment of entire rooms or for targeted treatment at the air intake of ventilation systems. A compressed air connection is required, the air inlet is a series 25 probe.

    IMPORTANT INFORMATION
    There are two nozzles included with the ST-83. A swirl nozzle and straight nozzle, below is a guide as to the settings to be used for each nozzle. It is extremely important to have the pressure correctly set. If the pressure is too low you will not get the required venturi effect to lift any liquid for effective fogging. If the pressure is too high, the air pressure will overcome the venturi effect. Both scenario's will reduce the devices ability to fog correctly.

    SWIRL NOZZLE: Min: 2 bar, Max : 5 bar, Optimum: 4 bar
    STRAIGHT NOZZLE : Min: 0.5 bar, Max 4 bar, Optimum: 2 bar











    Technical Specs

    The ST-83 disinfection cold fogging device.
    • Stainless steel / plastic.
    • Safe application for disinfection.
    • Minimum required pressure is 3 bar.
    • Air connection is required.