A box
Free UK Mainland Delivery on online order over £500*
An award
Over 40 Years of industry experience
Warehouse
Extensive Warehouse stocking over 10,000 products

Please refresh the page in 1 minute to see the next delivery time.

Our next despatch cut-off point is ?? Days ?? Hours ?? Minutes ?? Seconds

YELLOW BLUE 30 METRE 40 BAR HYGIENE ULTRA HOSE, 1/2"M ENDS (DN12) SMOOTH

YELLOW BLUE 30 METRE 40 BAR HYGIENE ULTRA HOSE, 1/2"M ENDS (DN12) SMOOTH

SKU

Technical Spec

Inlet 1/2" Male
Outlet 1/2" Male
Hose Type Smooth
Bar 40
Colour Yellow
Length 30m
Max Temp °C 70
DN Internal Diameter 12mm

Datasheets

Need help?

Contact G&S 01768 865985

Overview

Open plant cleaning using foam

Open plant cleaning enures all machines and surfaces in a food processing environment are thoroughly cleaned and disinfected. As a producer or processor of foods it is critical to maintain constant hygiene standards, this is achieved by applying foam using specialist equipment.

Exclusive to G&S, the Hygiene Ultra 40 is fully HACCP compliant and is perfect for use in food processing environments.

Antimicrobial: Manufactured with a antimicrobial top layer, preventing the growth of micro-organisms and dramatically lowering the risk of cross contamination.

Specialist size: Made with a 12mm internal diameter, the Hygiene Ultra hose enables the foam to travel without collapsing back into a liquid state.

Flexible: Designed with flexibility in mind, allowing for easy manoeuvrability without causing strain to the operator.

G&S have a range of equipment dedicated to cleaning food processing environments. Take a look at our Food Industry page for more information.

Technical Specification

  • Length: 30m
  • Connectors: Stainless Steel 1/2"M x 1/2"M
  • Working Pressure: 40bar / 580psi
  • Burst Pressure (23°C): 190bar / 2,755psi
  • Burst Pressure (70°C): 105bar / 1,520psi
  • Inner Diameter: 12mm
  • Outer Diameter: 22mm
  • Max Temperature: 70°C

Export Information

  • Commodity Code: 3917390099
  • Country of Origin: United Kingdom
  • Weight: 10.70kg
Length 1/2"F 1/2"MF 1/2"M
10 Metres HUY10FF HUY10MF HUY10MM
15 Metres HUY15FF HUY15MF HUY15MM
20 Metres HUY20FF HUY20MF HUY20MM
25 Metres HUY25FF HUY25MF HUY25MM
30 Metres HUY30FF HUY30MF HUY30MM

Foam Injector size guide.

Use the below chart to help you select the correct injector size.

Using the chart

You will need to know the flow rate and pressure of the pressure washer or system that the injector is to be installed.

Firstly select the closest flow rate (round up if required)

Then move right across the chart until you are at the closest pressure column.

The top number (1.6) is the injector size.

For foam injectors not using compressed air the number in brackets underneath is the correct ST75 foam lance size required.

Clearance Products