Don't have an account?
Creating an account has many benefits: check out faster, keep more than one address, track orders and more.
YELLOW 10 METRE 40 BAR HYGIENE ULTRA HOSE, 1/2"M ENDS (DN12) SMOOTH
Technical Spec
| Inlet | 1/2" Male |
|---|---|
| Outlet | 1/2" Male |
| Hose Type | Smooth |
| Bar | 40 |
| Colour | Yellow |
| Length | 10m |
| Max Temp °C | 70 |
| DN Internal Diameter | 12mm |
Description
Datasheets
Need help?
Contact G&S 01768 865985
Overview
Open plant cleaning using foam
Open plant cleaning enures all machines and surfaces in a food processing environment are thoroughly cleaned and disinfected. As a producer or processor of foods it is critical to maintain constant hygiene standards, this is achieved by applying foam using specialist equipment.
Exclusive to G&S, the Hygiene Ultra 40 is fully HACCP compliant and is perfect for use in food processing environments.
- Antimicrobial: Manufactured with a antimicrobial top layer, preventing the growth of micro-organisms and dramatically lowering the risk of cross contamination.
- Specialist size: Made with a 12mm internal diameter, enabling foam to travel down the hose without collapsing back into a liquid state, essential when using foam injectors with compressed air.
- Flexible: Designed with flexibility in mind, allowing for easy manoeuvrability without causing strain to the operator.
G&S have a range of equipment dedicated to cleaning food processing environments. Take a look at our Food Industry page for more information.
Technical Specification
- Length: 10m
- Connectors: Stainless Steel 1/2"M x 1/2"M
- Working Pressure: 40bar / 580psi
- Burst Pressure (23°C): 190bar / 2,755psi
- Burst Pressure (70°C): 105bar / 1,520psi
- Inner Diameter: 12mm
- Outer Diameter: 22mm
- Max Temperature: 70°C
Export Information
- Commodity Code: 3917390099
- Country of Origin: United Kingdom
- Weight: 3.90kg
Foam Injectors using compressed air
Foam injectors using compressed air connections create foam at the injector itself, a hose with 12mm internal diameter is required preventing foam from collapsing back into a liquid state.
ST160.2 Foam Injector
Technical Specification
- Inlet/Outlet 1/2" Female
- 350 Bar
- 90°C
- Stainless Steel
- Air Connection 1/4" male
The ST160.2 foam injector is especially designed for low and medium pressure applications from a water inlet of 5 bar and generates excellent foam by an additional air connection positioned on the injector.
ST160.3 Foam Injector
Technical Specification
- Inlet/Outlet 1/2" Female
- 100 lpm
- 350 Bar
- 90°C
- Stainless Steel
- Air Connection 1/4" male
A stainless steel foam injector with compressed air connection and wall bracket. In high pressure range this injector can achieve more than 100 l/min and features three foam connection points which can be configured independently.
ST164 Foam Injector
Technical Specification
- Inlet/Outlet 1/2" Female
- 80 lpm
- 350 Bar
- 90°C
- Stainless Steel
- Air Connection 1/4" male
This injector allows the user to have up to two different chemical options attached. The different chemicals can be selected by positioning the lever.
ST168 Foam Injector
Technical Specification
- Inlet/Outlet 1/2" Female
- 80 lpm
- 350 Bar
- 90°C
- Stainless Steel
- Air Connection 9mm
The lever on the ST168 Foam injector makes it possible to easily change from chemical to rinse mode, the injector has a compressed air connection which creates thick foam at the injector.