A box
Free UK Mainland Delivery on online order over £500*
An award
Over 40 Years of industry experience
Warehouse
Extensive Warehouse stocking over 10,000 products

Please refresh the page in 1 minute to see the next delivery time.

Our next despatch cut-off point is ?? Days ?? Hours ?? Minutes ?? Seconds

ST322 REPAIR KIT

ST322 REPAIR KIT

SKU

Description

To suit swivels: 200322500 200322510 200322520 200322522 200322523 200322525

Technical Spec

Bar400
Max Temp °C90
Weight0.08
Country of OriginGermany

Datasheets

Need help?

Contact G&S 01768 865985

Overview

Seal Kit for ST322 Swivel Elbows

ST322 repair kit. Mounting instructions ST-322

1. Grease the sliding ring and the O-ring (items 5 and 2).

2. Slide the mounting hose (Pos.4) over the banjo bolt (Pos.6).

3. Now slide the first support ring (item 1) over the mounting hose and set insert it into the indicated 1st groove of the banjo bolt.

4. Slide the 2nd support ring (item 1) into the 4th slot.

5. Slide the first O-ring (pos.5) over the mounting hose and set it into the 2nd groove.

6. Slide the second O-ring into the third slot.

7. Slide the first sliding ring (item 2) over the mounting hose and set put him in the 3rd groove.

8. Slide the second slide ring into the 2nd groove.

9. Since the slip rings have been stretched, they must be calibrated through the calibration sleeve become.

10. To do this, push the mounting hose completely over the banjo bolt and slide the calibration mandrel with a little grease on the slip rings. (Be careful not to jam the slide ring.)

Distributor request Don't have a G&S account but need a distributor? Click Here