Don't have an account?
Creating an account has many benefits: check out faster, keep more than one address, track orders and more.
ST-164 INJECTOR WITH DOUBLE CHECK AIR MODULE
Description
Technical Spec
Inlet | 1/4" Female |
---|---|
Outlet | 1/2" Female |
Material | Stainless Steel |
Bar | 350 |
Max Temp °C | 100 |
Weight | 2.77 |
Country of Origin | Germany |
Datasheets
- Restriction Set Download
Need help?
Contact G&S 01768 865985
Overview
Help with sizes
Use the below chart to help you select the correct injector size.
You will need to know the flow rate and pressure of the pressure washer or system that the injector is to be installed.
Firstly select the closest flow rate (round up if required)
Then move right across the chart until you are at the closest pressure column.
The top number (1.6) is the injector size.
The number in brackets underneath is the recommended ST75 foam lance required.
Alternative | ||||
Injector Size | Injector Part No | ST75 Size | ST75 Foam Lance | ST72 Foam Lance |
1.3 | 200160500 | 05 | 200075576 | 200072633 |
1.4 | 200160505 | 07 | 200075572 | 200072633 |
1.5 | 200160510 | 07 | 200075572 | 200072633 |
1.6 | 200160515 | 075 | 200075572 | 200072633 |
1.7 | 200160520 | 10 | 200075573 | 200072625 |
1.8 | 200160525 | 13 | 200075578 | 200072625 |
1.9 | 200160530 | 13 | 200075578 | 200072625 |
2.0 | 200160535 | 15 | 200075579 | 200072629 |
2.1 | 200160540 | 15 | 200075579 | 200072629 |
2.2 | 200160545 | 15 | 200075579 | 200072629 |
2.3 | 200160550 | 20 | Please Contact | 200072629 |