Don't have an account?
Creating an account has many benefits: check out faster, keep more than one address, track orders and more.
ST-167 BYPASS FOAM INJECTOR 1.8
SKU
200167860
Description
Stainless Steel
Inlet: ST-45-250 Female
Outlet: ST-45-250 Male
Max: 350 bar
Max: 100°C
Technical Spec
Inlet | ST45 Female |
---|---|
Outlet | ST45 Male |
Material | Stainless Steel |
Bar | 350 |
Colour | Blue |
Max Temp °C | 100 |
Weight | 1.89 |
Country of Origin | Germany |
Need help?
Contact G&S 01768 865985
Overview
easyfoam365+ product line has been enlarged
The injectors completely made out of stainless steel make it possible to open two cross section areas (50 mm2 each) in order to guarantee a smooth use without drop in pressure when washing/rinsing.
This ensures that the injector can be permanently kept in the high pressure line, also at the time when large water quantities are used e.g. in the agriculture or food industry.
The cleaning capacity when cleaning and rinsing is not affected at all.
A lever makes it possible to change from the cleaning and rinsing mode into injector operation.
When using the cleaning mode, there are two bore holes guiding the high pressure water parallel to the injector (bypass mode).
When using the injector the available water quantity is guided through the injection area.
In combination with a foam lance (ST-72, ST-74 oder ST-75), an adjustable or a triple nozzle the easyfoam365+ injector ST-167 can suck in chemicals by means of the integrated check valve made out of stainless steel.
It depends on the chosen nozzle whether the chemical can also be sprayed on or foamed.
The foaming covers large areas and a long exposure time is guaranteed.
One further advantage of the foam cleaning is that already covered surfaces are easily seen.
The easyfoam365+ injector which is available in the nozzle size of 1.2 - 2.8 mm meets the requirements in every field of application in the professional cleaning industry.
The dosing is adjusted by one of the 10 nozzle inserts which are included in the consignment.
As an alternative there are also versions with the infinitely variable dosing unit ST-161 available.
The connection for chemicals equipped with an integrated check valve and an intake for the nozzle inserts has a hose tail for chemical suction hoses being 9 mm in diameter in order to suck in especially viscous fluids.
Thedirection of flow is marked with arrows to guarantee a smooth installation.
Coupling ST-45-250 nickel-plated brass : plug
ST-45-250 stainless steel. Injector ST-167 with
metering valve ST-161, suction hose 2,000 mm
and suction filter ST-31. Max. 250 bar / 100 °C