Home /
CAT PUMP 45 WITH LEFT HAND SHAFT

CAT PUMP 45 WITH LEFT HAND SHAFT

Product Code: 13345L

Download Image

Overview

CAT PUMP 45 WITH LEFT HAND SHAFT.

Related Products

View

CAT SEAL KIT (45) FOR 3 PISTONS

Product code: 1330629
View

CAT PISTON ROD OIL SEAL

Product code: 1343228
View

CAT VALVE KIT (45) (X3)

Product code: 1330683
View

CAT OIL SEAL

Product code: 1343222

Technical Specs

Flow: 17.1 LPM
Pressure: 241 BAR
RPM: 1645
Wattage: 8.0 Kw
Shaft: 20mm
Inlet: 1/2" Female
Outlet: 3/8" Female

Weight: 10.6000 kg

Not In Catalogue

Datasheet

Parts Diagram
Data Sheet
Service Manual

Troubleshooting Guide for the CAT PUMP 45 WITH LEFT HAND SHAFT

INLET

OUTLET

Direction of water flow

Test 1

Remove the foam lance from the gun or lance. Pull the trigger. Is chemical being sucked up through the injector

YES

PLEASE NOTE

The Suttner range of St160 injectors with NOT work if:

A K Series injectors is fitted, as it won't work with the ST75. An ST72 or the ST5.1 foam lances are required instead
There is already a chemical injector is fitted to the pressure washer/system
If the water temperature when foaming exceeds 50C(unto 90 Rince)
The hose is wound onto a hose wheel.(THe hose need to be fully unwound for the injector to work correctly)
The hose has been joined to another hose
If there is some sort of various-press or other pressure adjuster in the system

INLET

OUTLET

Direction of water flow

<< GO BACK

RE-ATTACH THE FOAM LANCE
Is there milky water coming oue the end of the foam lance rather than the brass nozzle in the center?

YES NO

PLEASE NOTE

The Suttner range of St160 injectors with NOT work if:

A K Series injectors is fitted, as it won't work with the ST75. An ST72 or the ST5.1 foam lances are required instead
There is already a chemical injector is fitted to the pressure washer/system
If the water temperature when foaming exceeds 50C(unto 90 Rince)
The hose is wound onto a hose wheel.(THe hose need to be fully unwound for the injector to work correctly)
The hose has been joined to another hose
If there is some sort of various-press or other pressure adjuster in the system

INLET

OUTLET

Direction of water flow

<< GO BACK

Remove the chemical pipe from the injector and test to see if there is any suction when re-running TEST 1. Is there any suction?

YES NO

PLEASE NOTE

The Suttner range of St160 injectors with NOT work if:

A K Series injectors is fitted, as it won't work with the ST75. An ST72 or the ST5.1 foam lances are required instead
There is already a chemical injector is fitted to the pressure washer/system
If the water temperature when foaming exceeds 50C(unto 90 Rince)
The hose is wound onto a hose wheel.(THe hose need to be fully unwound for the injector to work correctly)
The hose has been joined to another hose
If there is some sort of various-press or other pressure adjuster in the system

INLET

OUTLET

Direction of water flow

<< GO BACK

Check the following *the foam pad may be blocked. Replace and retry Test 1.

PLEASE NOTE

The Suttner range of St160 injectors with NOT work if:

A K Series injectors is fitted, as it won't work with the ST75. An ST72 or the ST5.1 foam lances are required instead
There is already a chemical injector is fitted to the pressure washer/system
If the water temperature when foaming exceeds 50C(unto 90 Rince)
The hose is wound onto a hose wheel.(THe hose need to be fully unwound for the injector to work correctly)
The hose has been joined to another hose
If there is some sort of various-press or other pressure adjuster in the system

INLET

OUTLET

Direction of water flow

Check the following
*Are the internal injector jets securely in place?
Is the check value stuck or broken?
Is the injector on the correct way?
Arrows on inlet side
If No to all of the above please call our technical team.

PLEASE NOTE

The Suttner range of St160 injectors with NOT work if:

A K Series injectors is fitted, as it won't work with the ST75. An ST72 or the ST5.1 foam lances are required instead
There is already a chemical injector is fitted to the pressure washer/system
If the water temperature when foaming exceeds 50C(unto 90 Rince)
The hose is wound onto a hose wheel.(THe hose need to be fully unwound for the injector to work correctly)
The hose has been joined to another hose
If there is some sort of various-press or other pressure adjuster in the system

INLET

OUTLET

Direction of water flow

div class="content-box2">

<< GO BACK

Connect the chemical pipe and re-run Test 1 then check the follwowing
*Is there a blockage or air gap in the chemical pipe?
*Is the chem filter blocked?
*Is all of the chemical filter in the chemical?
Is the chem pipe securely clamped so that no air can get in?

PLEASE NOTE

The Suttner range of St160 injectors with NOT work if:

A K Series injectors is fitted, as it won't work with the ST75. An ST72 or the ST5.1 foam lances are required instead
There is already a chemical injector is fitted to the pressure washer/system
If the water temperature when foaming exceeds 50C(unto 90 Rince)
The hose is wound onto a hose wheel.(THe hose need to be fully unwound for the injector to work correctly)
The hose has been joined to another hose
If there is some sort of various-press or other pressure adjuster in the system

INLET

OUTLET

Direction of water flow

<< GO BACK

PLEASE NOTE

The Suttner range of St160 injectors with NOT work if:

A K Series injectors is fitted, as it won't work with the ST75. An ST72 or the ST5.1 foam lances are required instead
There is already a chemical injector is fitted to the pressure washer/system
If the water temperature when foaming exceeds 50C(unto 90 Rince)
The hose is wound onto a hose wheel.(THe hose need to be fully unwound for the injector to work correctly)
The hose has been joined to another hose
If there is some sort of various-press or other pressure adjuster in the system

INLET

OUTLET

Direction of water flow

<< GO BACK

Check the following:
Is the nozzle inside the inlet of the foam lance the right size or blocked?
if you have a long hose fitted, try increasing the internal foam lance
nozzle size and retry TEST 1

PLEASE NOTE

The Suttner range of St160 injectors with NOT work if:

A K Series injectors is fitted, as it won't work with the ST75. An ST72 or the ST5.1 foam lances are required instead
There is already a chemical injector is fitted to the pressure washer/system
If the water temperature when foaming exceeds 50C(unto 90 Rince)
The hose is wound onto a hose wheel.(THe hose need to be fully unwound for the injector to work correctly)
The hose has been joined to another hose
If there is some sort of various-press or other pressure adjuster in the system

INLET

OUTLET

Direction of water flow

<< GO BACK

PLEASE NOTE

The Suttner range of St160 injectors with NOT work if:

A K Series injectors is fitted, as it won't work with the ST75. An ST72 or the ST5.1 foam lances are required instead
There is already a chemical injector is fitted to the pressure washer/system
If the water temperature when foaming exceeds 50C(unto 90 Rince)
The hose is wound onto a hose wheel.(THe hose need to be fully unwound for the injector to work correctly)
The hose has been joined to another hose
If there is some sort of various-press or other pressure adjuster in the system

CAT PUMP 45 WITH LEFT HAND SHAFT

Product Code: 13345L

Overview

Technical Specs

Datasheet

Partners

Help & Advice

Support

Corporate

COOKIE CONTROL

CAT PUMP 45 WITH LEFT HAND SHAFT

Product Code: 13345L

Overview

Related Products

Technical Specs

Datasheet

Partners

Help & Advice

Support

Corporate